Workshop manual for Fourth generation (YB) of the subcompact car Kia Rio. The new Kia Rio is powered by a range of petrol and diesel engines, each offering high efficiency and willing acceleration. An increasing customer appetite for downsized, turbocharged engines has led to the adoption of Kia's latest three-cylinder 1.0-litre T-GDI (turbo gasoline direct injection) engines. As well as offering high efficiency and low emissions, the lightweight nature of the new T-GDI engines benefit the Rio's keen front-end handling, with less mass and inertia for the car to work against under cornering.

Tire specification and pressure label The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures recommended for your vehicle.
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal
Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving".