| Adjustment |
| 1. |
After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. |
| 2. |
Adjust the hood height by turning the hood overslam bumpers (C). |
| 3. |
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or right and left.
|
Components and components location Component Location 1. Front seat belt buckle Repair procedures Replacement 1.
Components and components location Component Location 1. Hood assembly Repair procedures Replacement Be careful not to damage the hood and body.
Components and components location Component Driver Power Window Switch Schematic diagrams Circuit Diagram [Non-Folding Mirror Type] [Folding Mirror Type] Repair procedures Removal 1.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.