Kia Rio: Heating,Ventilation, Air Conditioning / Controller
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit.
Components and components location Components Connector pin function NO. Connector A Connector B 1 Low Battery 2 Common ISG Battery 3 High Illumination (+) 4 Middle_LOW Sensor (+5V) 5 Middle_High ⁻ 6 High Intake actuator Feedback 7 Evaporator sensor (+) 8 Ambient sensor (+) 9 ⁻ 10 ⁻ 11 Intake actuator (FRE) 12 Intake actuator (REC) 13 HTD 14 Rear defog switch 15 Blower on signal to common 16 Illumination (-) 17 IGN2 18 IGN1 19 ⁻ 20 Max blower on signal 21 PTC relay 3 22 PTC relay 2 23 PTC on signal 24 Detent out (-) 25 ⁻ 26 Chassis_CAN (High) 27 Chassis_CAN (Low) 28 ⁻ 29 ECV (+) 30 ECV (-) 31 Sensor ground 32 Ground Schematic diagrams Schematic Diagram Repair procedures Replacement 1.
Other information:
Kia Rio 2017-2023 YB Service Manual: Rear Glass Defogger Printed Heater
Repair procedures Inspection • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressure on the tin foil with hand and move the tin foil along the grid line to check for open circ
Kia Rio 2017-2023 YB Service Manual: Rear Washer Motor
Repair procedures Inspection 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign material or conta
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Timing Chain
- Body Electrical System
- Suspension System
- New on site
- Most important about car
