Kia Rio: Automatic Transaxle System / Hydraulic System
- Torque Converter Control Solenoid Valve (PCSV-D)
- 24 Brake Control Solenoid Valve (PCSV-B)
- Underdrive Clutch Control Solenoid Valve (PCSV-C)
- Overdrive Clutch Control Solenoid Valve (PCSV-A)
- Line Pressure Control Solenoid Valve
- ON/OFF Solenoid Valve (SCSV-A)
- Fluid
- Oil Filter
- Oil Pump
- Valve Body
Description and operation Description Brakes The automatic transaxle (A4CF1) uses the low and reverse brake and the second brake. The low and reverse brake is fixed by the low and reverse annulus gear and overdrive planetary carrier.
Specifications Specification Item Specification Type Normal open Input voltage 12 V Coil resistance 3.
Other information:
Kia Rio 2017-2023 YB Service Manual: Ignition Switch
Repair procedures Inspection 1. Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column. 2. Check for continuity between the terminals.
Kia Rio 2017-2023 YB Service Manual: Power Mosfet (FATC)
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Brake System
- Engine Mechanical System
- Timing Chain
- New on site
- Most important about car
