Kia Rio: Hydraulic System / Oil Pump
Description and operation
| Discription |
Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.
Repair procedures Removal 1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover").
Description and operation Description The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump.
Other information:
Kia Rio 2017-2023 YB Service Manual: Cluster Ionizer (FATC only)
Description and operation Description The cluster ionizer helps to clean up odors in the vehicle or from the air-conditioner system. When the ignition switch ON, the inoizer runs a "CLEAN" mode and then a "ION" mode, switching every about 15 minutes.
Kia Rio 2017-2023 YB Service Manual: Blower Unit
Components and components location Component Location Components 1. Intake actuator 2. Air filter 3. Air filter cover 4. Resistor 5. Mosfet 6. Intake seal 7. Intake upper cover 8.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Engine Oil and Filter
- Battery
- Engine Electrical System
- New on site
- Most important about car
