Specifications Specifications Transaxle model M6CF1 Engine type Gasoline 1.4 MPI Manual transalxe oil Capacity 1.
Components and components location Components Location 1. Control shaft complete Repair procedures Removal 1. Shift the gear to "neutral".
Repair procedures Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp (A) after loosening the mounting screws. 3.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.