| Components |

| 1. Rear seat cushion pad 2. Rear seat cushion covering 3. Rear seat back covering 4. Rear seat back pad 5. Rear seat back board |
6. Rear seat back frame 7. Rear seat back bezel 8. Rear seat headrest guide 9. Rear seat headrest |
Repair procedures Replacement 1. Loosen the rear door checker (B) mounting bolt. Tightening torque : 21.
Components and components location Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly Repair procedures Replacement 1.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Repair procedures Oil Specification 1. The HFC-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor oil (PAG) varies according to compressor model.