Kia Rio: Maintenance
- Power Train
- Battery
- Cooling System
- Drive Belt
- Engine Oil and Filter
- Exhaust System
- Fluid (ATF)
- Fuel Filter (For Diesel engine only)
- Fuel Lines, Hoses and Connections
- Manual Transaxle Oil
- Spark Plug
- Valve Clearance
- Vapor Hose and Fuel Filler Cap
- Chassis
- Brake/Clutch Fluid
- Brake Lines, Hoses and Connections
- Disc Brakes and Pads
- Drive Shafts and Boots
- Parking Brake
- Steering Gear Rack, Linkage and Boots
- Suspension Ball Joints
- Suspension Mounting Bolts
- Tire (pressure & tread wear)
- Body
- Maintenance Schedule
General information Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service.
Other information:
Kia Rio 2017-2023 YB Service Manual: Immobilizer Control Unit
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Kia Rio 2017-2023 YB Service Manual: Mode Control Actuator
Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Emission Control System
- Engine Oil and Filter
- Engine Mechanical System
- New on site
- Most important about car
