| Inspection |
| 1. |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage. |
| 2. |
Check for unusual exhaust sounds or abnormal exhaust fumes. |
Repair procedures Inspection Engine Oil Level Be sure that the vehicle is on level ground.
Repair procedures Inspection Automatic Transaxle Fluid (ATF) Level Check 1. Place the vehicle on a level ground. 2.
Components and components location Components 1. Door lock/unlock knob cable 2. Door latch assembly Repair procedures Inspection • When removing with a flat-tip screwdriver or remover, wrap
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.