| Inspection |
Visually check the loose mount bolt.
Repair procedures Inspection Visually check, must be free from injurious flaw and crack.
Repair procedures Inspection 1. Check the tire pressure. 15(inch) : 230 kPa (33 psi) 16(inch) : 230 kPa (33 psi) 17(inch) : 230 kPa (33 psi) Tire Rotation Checking For Pull And Wander If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.
Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.