Kia Rio: Body (Interior and Exterior) / Crash Pad

Kia Rio 2017-2022 YB Service Manual / Body (Interior and Exterior) / Crash Pad

Components and components location
Components

1. Cowl cross bar assembly
2. Main wiring harness
3. Main crash pad assembly
4. Side air vent duct assembly [RH]
5. Crash pad passenger side panel assembly
6. Crash pad center lower panel assembly
7. Glove box housing assembly
8. Heater control assembly
9. Audio unit assembly
10. Center fascia panel assembly
11. Cluster fascia upper panel assembly
12. Crash pad driver side panel assembly
13. Side air vant duct assembly [LH]
14. Instrument cluster assembly

Cowl Top Cover
Components and components location Component Location 1. Cowl top cover Repair procedures Replacement  & ...

Cluster Fascia Panel
Components and components location Component Location 1. Cluster fascia panel Repair procedures Replacement & ...

Other information:

Kia Rio 2017-2022 YB Service Manual: Water Jacket Insert


Repair procedures Remove and Installation 1. Remove the cylinder head assembly. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket insert (A).    ...

Kia Rio 2017-2022 YB Owners Manual: If the engine overheats


If your temperature gauge indicates overheating, you will experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2. Place the shift lever in P (Intelligent Variable ...

Copyright © www.krioyb.com 2017-2022