Kia Rio: Crash Pad / Cluster Fascia Panel

Kia Rio 2017-2021 YB Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel

Components and components location
Component Location

1. Cluster fascia panel


Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the cluster fascia panel (A) by using a remover.

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Crash Pad
Components and components location Components 1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side air vent duct assembly [RH] ...

Center Fascia Panel
Components and components location Component Location 1. Center fascia panel assembly Repair procedures Replacement ...

Other information:

Kia Rio 2017-2021 YB Service Manual: Rear Wheel Speed Sensor


Components and components location Components Drum type Disc type Repair procedures Removal 1. Remove the rear wheel & tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Rio 2017-2021 YB Service Manual: Drive Shafts and Boots


Repair procedures Inspection 1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage. ...

Copyright © www.krioyb.com 2017-2021