Kia Rio: Lighting System / Turn Signal Lamp

Kia Rio 2017-2025 YB Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp

Repair procedures
Removal
Door Mirror Turn Signal Lamp
1.

Disconnect the negative (-) battery terminal.

2.

Remove the mirror (A) from the mirror holder.

  

Be careful not to damage the fixing clips (A).

3.

Disconnect the heating connectors (A) from the mirror.

4.

Remove the door mirror cover (A) after separating the mounting clips.

5.

Remove the door mirror turn signal lamp (A) after loosening the screw.

6.

Disconnect the connector (A) from the door mirror turn signal lamp (B).

Installation
1.

Install the door mirror turn signal lamp.

2.

Install the door mirror cover.

3.

Install the door mirror.

4.

Connect the negative (-) battery terminal.

Headlamps
Description and operation Description BI-FUNCTION 1. Definition – A headlamp with integrated functions of high and low beam ...

Room Lamp
Repair procedures Removal    • Put on gloves to prevent hand injuries. ...

Other information:

Kia Rio 2017-2025 YB Owners Manual: Air bag Warning Light, Seat Belt Warning Light


Air bag Warning Light This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 6 seconds and then goes off. When there is a malfunction with the SRS. In this case, have your vehicle inspected by a ...

Kia Rio 2017-2025 YB Service Manual: Fluid


Repair procedures Inspection Automatic Transaxle Fluid (ATF) Level Check 1. Place the vehicle on a level ground. 2. Start the engine to warm up the ATF. 3. Check by using KDS/GDS that the temperature of the ATF is b ...

Copyright © www.krioyb.com 2017-2025