Kia Rio: Lighting System / Room Lamp

Kia Rio 2017-2023 YB Service Manual / Body Electrical System / Lighting System / Room Lamp

Repair procedures
Removal
  

Put on gloves to prevent hand injuries.

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

1.

Disconnect the negative (-) battery terminal.

2.

Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

3.

Remove the room lamp (A) after loosening the screws.

  

When removing the room lamp, be careful of the direction in which the tool is inserted (B).

When inserting the tool in the opposite direction, take caution as the room lamp may be damaged.

4.

Remove the room lamp assembly (B) after disconnecting the room lamp connector (A).

Bulb Replacement

1.

Using a screwdriver or remover, separate the room lamp lens (A) from the room lamp.

2.

Disconnect the room lamp bulb (A).

Installation
1.

Connect the room lamp connector.

2.

Install the room lamp.

3.

Install the room lamp lens.

4.

Connect the negative (-) battery terminal.

Turn Signal Lamp
Repair procedures Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) fro ...

Vanity Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. ...

Other information:

Kia Rio 2017-2023 YB Owners Manual: Air cleaner


Filter replacement It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner compartment. Clean the filter by using compressed air. 1. Loosen the air cleaner cover attaching clips and open the cover. 2. Wipe the inside of the a ...

Kia Rio 2017-2023 YB Service Manual: Front Washer Motor


Repair procedures Inspection Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    • ...

Copyright © www.krioyb.com 2017-2023