Kia Rio: Crash Pad / Crash Pad Lower Panel

Kia Rio 2017-2024 YB Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Lower Panel

Components and components location
Component Location

1. Crash pad lower panel


Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the cluster fascia panel (A) by using a remover.

2.

Remove the crash pad side cover [LH] (A) by using a remover.

3.

Remove the front door scuff trim (A) by using a remover.

4.

Remove the cowl side trim (A) by using a remover.

5.

Remove the passenger compartment junction box cover (A).

6.

Separate the hood latch release handle cable (A) after loosening the mounting screws.

7.

Separate the crash pad lower panel (A) after loosening the bolts and screws.

8.

Disconnect the crash pad lower side switch connector (A).

9.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Crash Pad Garnish [RH]
Components and components location Component Location 1. Crash pad passenger side panel assembly Repair procedures Replacement ...

Glove Box Housing
Components and components location Component Location 1. Glove box housing assembly Repair procedures Replacement ...

Other information:

Kia Rio 2017-2024 YB Service Manual: Front Stabilizer Bar


Repair procedures Removal 1. Remove the universal joint bolt (A). Tightening torque : 32.4 - 37.3 N·m (3.3 - 3.8 kgf·m, 23.9 - 27.5 lb·ft)    ...

Kia Rio 2017-2024 YB Owners Manual: Transmitter precautions


The transmitter (or smart key) will not work if any of following occurs: The ignition key is in the ignition switch. You exceed the operating distance limit (about 30 m [90 feet]). The battery in the transmitter (or smart key) is weak. Other vehicles or objects may be blocking the signal. ...

Copyright © www.krioyb.com 2017-2024