Kia Rio: Automatic Transaxle System / Hydraulic System
- Torque Converter Control Solenoid Valve (PCSV-D)
- 24 Brake Control Solenoid Valve (PCSV-B)
- Underdrive Clutch Control Solenoid Valve (PCSV-C)
- Overdrive Clutch Control Solenoid Valve (PCSV-A)
- Line Pressure Control Solenoid Valve
- ON/OFF Solenoid Valve (SCSV-A)
- Fluid
- Oil Filter
- Oil Pump
- Valve Body
Description and operation Description Brakes The automatic transaxle (A4CF1) uses the low and reverse brake and the second brake. The low and reverse brake is fixed by the low and reverse annulus gear and overdrive planetary carrier.
Specifications Specification Item Specification Type Normal open Input voltage 12 V Coil resistance 3.
Other information:
Kia Rio 2017-2023 YB Service Manual: Front Fog Lamps
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3. Remove the front fog lamp assembly (A) after loosening the mounting screws.
Kia Rio 2017-2023 YB Service Manual: Mode Control Actuator
Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Emission Control System
- Maintenance
- Brake System
- New on site
- Most important about car
