| Component Location |

| 1. Windshield wiper arm & blade
2. Wiper & washer switch 3. Windshield washer hose & nozzle 4. Wiper motor & linkage assembly |
5. Washer motor 6. Washer reservoir tank 7. Wiper/Washer relay 8. Rear washer hose & nolzzle |
Repair procedures Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly.
Repair procedures Removal [BCM Type] 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Description and operation Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.