Kia Rio: Rear Door / Rear Door Inside Handle

Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear door trim.

(Refer to Rear Door - "Rear Door Trim")

2.

Separate the inside handle (A) after loosening the mounting screw.

3.

Remove the front door inside handle (B) after disconnecting the cable (A).

4.

Install in the reverse order of removal.

  

Check that glass operation is normal.

Check the damage glass channel, and replace if necessary.

Adjust glass if necessary.

    Components and components location Component Location 1. Rear door trim Repair procedures Replacement    Put on gloves to protect your hands.

    Components and components location Component Location 1. Rear door window glass Repair procedures Replacement    Put on gloves to protect your hands.

    Other information:

    Kia Rio 2017-2023 YB Service Manual: Rheostat

    Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.

    Kia Rio 2017-2023 YB Service Manual: Blower Resistor (MANUAL)

    Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.

    Categories

     
    Copyright © 2025 www.krioyb.com - 0.0124