Kia Rio: Forward Collision-Avoidance Assist (FCA) system (Radar type) / System setting and activation

Kia Rio 2017-2020 YB Owners Manual / Driving your vehicle / Forward Collision-Avoidance Assist (FCA) system (Radar type) / System setting and activation

System setting

The driver can activate FCA system by placing the ignition switch to the ON position and by selecting 'User Settings' → 'Driver Assistance' → 'Forward Collision-Avoidance Assist (FCA) system'.

FCA system deactivates when the driver cancels the system setting.

The warning light illuminates on the LCD display, when you cancel FCA system. It illuminates even with the ESC (Electronic Stability Control) OFF. The driver can monitor the FCA ON/OFF status on the LCD display. When the warning light remains ON with FCA system activated, have the system checked by an authorized Kia dealer.

The driver can select the initial warning activation time in the User Settings in the instrument cluster LCD display. The options for the initial Forward Collision Warning system include the following:

Forward Collision-Avoidance Assist (FCA) system (Radar type)
FCA system is designed to detect and monitor a vehicle ahead in the roadway through sensors (i.e., radar) to warn the driver that a collision is imminent and, if necessary, apply emergency braking ...

Prerequisite for activation
FCA system will activate when FCA system is selected on the LCD display, and when the following prerequisites are satisfied: - The ESC (Electronic Stability Control) is activated. - The driving sp ...

Other information:

Kia Rio 2017-2020 YB Owners Manual: Back-up lamp bulb replacement (for 5 door)


1. Open the liftgate. 2. Remove the service cover. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from bulb-socket by pulling it out. 5. Insert a new bulb by inserting it in ...

Kia Rio 2017-2020 YB Service Manual: Shift Lever


Components and components location Components 1. Knob 2. boots 3. Shift lever assembly 4. Retainer 5. Shift cable 6. Select cable Repair procedures Removal 1. Remove the knob by pulling it in the dire ...

Copyright © www.krioyb.com 2017-2020