FCA system is designed to detect and monitor a vehicle ahead in the roadway through sensors (i.e., radar) to warn the driver that a collision is imminent and, if necessary, apply emergency braking.
❈ Radar type FCA system does not operate to detect pedestrians in front.
WARNING - Forward Collision- Avoidance Assist (FCA) Limitations
FCA system is a supplemental system and is not a substitute for safe driving practices. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead to ensure it is safety to use FCA system.
WARNING
Take the following precautions when using Forward Collision- Avoidance Assist (FCA) system:
Check to be sure the parking brake is not engaged and that the parking brake indicator light is out before driving away. Driving through water may get the brakes wet.
System setting The driver can activate FCA system by placing the ignition switch to the ON position and by selecting 'User Settings' → 'Driver Assistance' → 'Forward Collision-Avoidance Assist (FCA) system'.
Components and components location Component Location 1. Driver power window switch 2. Assist power window switch 3 . Body Comtrol Module (BCM) 4 . Tailgate actuator 5 . Door latch lock actuator 6 .
Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving".