Kia Rio: Rear Seat Belt / Rear Seat Belt Buckle

Kia Rio 2017-2020 YB Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Buckle

Components and components location
Component Location

1. Rear seat belt buckle [RH]
2. Rear seat belt buckle [LH]

Repair procedures
Replacement
  

When installing the belt, be careful not to damage the retractor.

1.

Remove the rear seat cushion assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

2.

Remove the rear seat belt buckle (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

Rear Center Seat Belt Retractor
Components and components location Component Location [5 Door] 1. Rear center seat belt retractor [4 Door] 1. ...

Roof Trim
Components and components location Components (1) [Normal] 1. Sunvisor assembly [LH] 2. Sunvisor assembly [RH] 3. Roof trim assembly [Normal] 4. ...

Other information:

Kia Rio 2017-2020 YB Service Manual: Photo Sensor (FATC only)


Description and operation Description The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion ...

Kia Rio 2017-2020 YB Service Manual: Auto Light Sensor


Repair procedures Inspection Check if the auto light control operates like a timing chart shown below. Tail lamp output and head lamp (Low) output is controlled based on the auto light sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function Switch ...

Copyright © www.krioyb.com 2017-2020