Kia Rio: Features of your vehicle / Lighting
Battery saver function
- The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition key and opens the driver-side door.
- With this feature, the parking lights will turn off automatically if the
driver parks on the side of the road at night.
If necessary, to keep the lights on when the ignition key is removed, perform
the following:
1) Open the driver-side door.
2) Turn the parking lights OFF and ON again using the light switch on the steering
column.
Rear View Monitor function
■ Type A
■ Type B
Rear View Monitor system will activate with the ignition switch on and the shift
lever in the R (Reverse) position.
Please note that during ...
Headlight escort function (if equipped)
The headlights (and/or taillights) will remain on for approximately 5 minutes
after the ignition key is removed or turned to the ACC or LOCK position. Howeve ...
Other information:
Components and components location
Components
Description and operation
Description
The ISG OFF switch on the floor console can be used to deactivate the ISG function.
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
...
Blade inspection
Commercial hot waxes applied by automatic car washes have been known to make
the windshield difficult to clean.
Contamination of either the windshield or the wiper blades with foreign matter
can reduce the effectiveness of the windshield wipers. Common sources of contaminati ...