Kia Rio: Lighting / High beam operation
■ Type A
■ Type B
To turn on the high beam headlights, push the lever away from you. Pull it back for normal (low beam) position. The high beam indicator light will illuminate when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
WARNING - High beams
Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.
■ Type A
■ Type B
To flash the headlights, pull the lever towards you. It will return to the normal (low-beam) position when released. The headlight switch does not need to be on to use this flashing feature.
Auto light position
■ Type A
■ Type B
When the light switch is in the AUTO light position, the taillights and headlights
will turn ON or OFF automatically depending on the amount of light outside the vehicle. ...
Turn signals and lane change signals
■ Type A
■ Type B
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument ...
Other information:
Kia Rio 2017-2025 YB Service Manual: Automatic Transaxle
Components and components location Components 1. Inhibitor switch 2. Transaxle support bracket 3. Input speed sensor 4. Roll rod bracket 5. Roll rod support bracket 6. ATF cooler pipe 7. Main connector 8. ATF filler pipe 9. Torque co ...
Kia Rio 2017-2025 YB Service Manual: Windshield Wiper-Washer Switch
Repair procedures Removal [BCM Type] 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steering Wheel") 3. Remove the steering column upper ...
Copyright © www.krioyb.com 2017-2025
