Kia Rio: Features of your vehicle / Rear view monitor system

Kia Rio 2017-2024 YB Owners Manual / Features of your vehicle / Rear view monitor system

Rear View Monitor function

■ Type A

■ Type B

Rear View Monitor system will activate with the ignition switch on and the shift lever in the R (Reverse) position.

Please note that during initial start up, the rear view monitor may not display instantly due to the audio system booting up.

This system is a supplemental system that shows behind the vehicle through the UVO audio or navigation display backing-up.

It is the responsibility of the driver to always check the inside/outside rearview mirrors and the area behind the vehicle before and while backing up.

Always keep the camera lens clean. If lens is covered with foreign matter, the camera may not operate normally.

The rear view monitor is not a substitute for proper and safe backing-up procedures. Always drive safely and use caution when backing up.

The rear view monitor may not display every object behind the vehicle.

WARNING - Backing Up & Using Camera

Never rely solely on the rear view monitor when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view monitor by looking over your shoulders and checking your rear view mirrors.

Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you.

Cruise, Cruise SET, SPORT Mode Indicator Lights
Cruise Indicator Light This indicator light illuminates: • When the cruise control system is enabled. ❈For more details, refer to “Cruise Control System” in chapter 6. Cruise SET Indicat ...

Lighting
Battery saver function The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition ...

Other information:

Kia Rio 2017-2024 YB Service Manual: Hood


Repair procedures Adjustment 1. After loosening the hinge (A) mounting bolts, adjust the hood (B) by moving it up and down, or right and left. 2. Adjust the hood height by turning the hood overslam bumpers (C). 3. A ...

Kia Rio 2017-2024 YB Service Manual: Inhibitor Switch


Description and operation Description Detect the position of shift lever through the contact switch. Operation Table Schematic diagrams Circuit Diagram Repair procedures Inspection 1. Check the condition of connector. ...

Copyright © www.krioyb.com 2017-2024