Kia Rio: Indicator Lights / Immobilizer Indicator Light (With Smart Key)

Kia Rio 2017-2023 YB Owner's Manual / Features of your vehicle / Indicator Lights / Immobilizer Indicator Light (With Smart Key)

This indicator light illuminates for up to 30 seconds:

• When the vehicle detects the smart key in the vehicle properly while the Engine Start/Stop Button is ACC or ON.

- At this time, you can start the engine.
- The indicator light goes off after starting the engine.

This indicator light blinks for about 10 seconds:

• When the smart key is not in the vehicle.

- At this time, you cannot start the engine.

This indicator light illuminates for 2 seconds and goes off:

• When the vehicle can not detect the smart key which is in the vehicle while the Engine Start/Stop Button is ON.

In this case, have your vehicle inspected by an authorized Kia dealer.

This indicator light blinks:

• When the battery of the smart key is weak.

- At this time, you can not start the engine. However, you can start the engine if you press the Engine Start/Stop Button with the smart key. (For more details, refer to “Starting the Engine” in section 6).

• When there is a malfunction with the immobilizer system.

In this case, have your vehicle inspected by an authorized Kia dealer.

    Electronic Stability Control (ESC) OFF Indicator Light This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.

    This indicator light blinks: • When you turn the turn signal light on. If any of the following occurs, there may be a malfunction with the turn signal system.

    Other information:

    Kia Rio 2017-2023 YB Service Manual: Refrigerant line

    Repair procedures Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace faulty tube or hose.    Cap the open fittings immediately to keep moisture or dirt out of the system.

    Kia Rio 2017-2023 YB Service Manual: Ambient Temperature Sensor

    Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

    Categories

     
    Copyright © 2026 www.krioyb.com - 0.0125