Kia Rio: Indicator Lights / Electronic Stability Control (ESC) OFF, Immobilizer Indicator Lights

Kia Rio 2017-2023 YB Owner's Manual / Features of your vehicle / Indicator Lights / Electronic Stability Control (ESC) OFF, Immobilizer Indicator Lights

Electronic Stability Control (ESC) OFF Indicator Light

This indicator light illuminates:

  • Once you set the ignition switch or Engine Start/Stop Button to the ON position.
    - It illuminates for approximately 3 seconds and then goes off.
  • When you deactivate the ESC system by pressing the ESC OFF button.

❈For more details, refer to “Electronic Stability Control (ESC)” in chapter 6.

Immobilizer Indicator Light (Without Smart Key)

This indicator light illuminates:

• When the vehicle detects the immobilizer in your key while the ignition switch is ON.

- At this time, you can start the engine.
- The indicator light goes off after starting the engine.

This indicator light blinks:

• When there is a malfunction with the immobilizer system.

In this case, have your vehicle inspected by an authorized Kia dealer.

    This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off.

    This indicator light illuminates for up to 30 seconds: • When the vehicle detects the smart key in the vehicle properly while the Engine Start/Stop Button is ACC or ON.

    Other information:

    Kia Rio 2017-2023 YB Service Manual: Smart Key Diagnostic

    Repair procedures Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with KDS/GDS quickly. KDS/GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. The following three features will be major problem in SMART KEY system.

    Kia Rio 2017-2023 YB Service Manual: Evaporator Temperature Sensor

    Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling. Repair procedures Inspection 1.

    Categories

     
    Copyright © 2026 www.krioyb.com - 0.0199