| Remove and Installation |
| 1. |
Remove the automatic transaxle . (Refer to Automatic Transaxle System - "Automatic Transaxle") |
| 2. |
Remove the adapter plate (A) and drive plate (B).
|
| 3. |
Install in the reverse order of removal. |
Repair procedures Remove and Installation 1. Remove the cylinder head assembly. (Refer to Cylinder Head Assembly - "Cylinder Head") 2.
Repair procedures Removal 1. Remove the manual Transaxle. (Refer to Manual Transaxle System - "Manual Transaxle") 2.
Components and components location Component Location 1. Cap 2. Nut 3. Wiper arm & blade 4. Cowl top cover 5. Bolt 6. Wiper motor & linkage assembly 7. Wiper motor connector Repair procedures Removal 1.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.