Other information:
Repair procedures
Removal and Installation
1.
Disconnect the oil pressure switch connector (A) and then remove the
oil pressure switch (B).
Tightening torque :
9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)
...
Stop and tail lamp (LED type) bulb replacement (for 4 door)
If the stop and tail lamp (LED) (1,2) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because it is part of
an integrated unit. The LED lamps have to be ...