| Component Location |

| 1. Front pillar trim |
| Replacement |
Put on gloves to protect your hands. |
|
| 1. |
Using a remover, remove the front pillar trim (A).
|
| 2. |
Install in the reverse order of removal.
|
Components and components location Component Location 1. Cowl side trim Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Component Location 1. Center pillar lower trim 2. Center pillar upper trim Repair procedures Replacement [Center pillar lower trim] Put on gloves to protect your hands.
Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3.
Repair procedures Oil Specification 1. The HFC-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor oil (PAG) varies according to compressor model.