Kia Rio: Heating,Ventilation, Air Conditioning / Controller

Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit.

Components and components location Components Connector pin function NO. Connector A Connector B 1 Low Battery 2 Common ISG Battery 3 High Illumination (+) 4 Middle_LOW Sensor (+5V) 5 Middle_High ⁻ 6 High Intake actuator Feedback 7 Evaporator sensor (+) 8 Ambient sensor (+) 9 ⁻ 10 ⁻ 11 Intake actuator (FRE) 12 Intake actuator (REC) 13 HTD 14 Rear defog switch 15 Blower on signal to common 16 Illumination (-) 17 IGN2 18 IGN1 19 ⁻ 20 Max blower on signal 21 PTC relay 3 22 PTC relay 2 23 PTC on signal 24 Detent out (-) 25 ⁻ 26 Chassis_CAN (High) 27 Chassis_CAN (Low) 28 ⁻ 29 ECV (+) 30 ECV (-) 31 Sensor ground 32 Ground Schematic diagrams Schematic Diagram Repair procedures Replacement 1.

Other information:

Kia Rio 2017-2023 YB Service Manual: Rain Sensor

Components and components location Components Schematic diagrams Circuit Diagram Description and operation Description Integrated Rain Sensor Integrated rain sensor (A) controls three systems: front wiper, auto-light, and central air conditioner.

Kia Rio 2017-2023 YB Service Manual: Evaporator Temperature Sensor

Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling. Repair procedures Inspection 1.

Categories

 
Copyright © 2026 www.krioyb.com - 0.016