Kia Rio: Cruise Control system / To increase and decrease cruise control set speed
To increase cruise control set speed:
Follow either of these procedures:
- Move the lever up (to RES+) and hold it.Your vehicle will accelerate. Release
the lever at the speed you want.
- Move the lever up (to RES+) and release it immediately. The cruising speed
will increase by 2 km/h (1 mph) each time you move the lever up (to RES+) in
this manner.
To decrease the cruising speed:
Follow either of these procedures:
- Move the lever down (to SET-) and hold it. Your vehicle will gradually slow
down. Release the lever at the speed you want to maintain.
- Move the lever down (to SET-) and release it immediately. The cruising speed
will decrease by 2 km/h (1 mph) each time you move the lever down (to SET-)
in this manner.
To temporarily accelerate with the cruise control on:
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal.
Increased speed will not interfere with cruise control operation or change the
set speed.
To return to the set speed, take your foot off the accelerator pedal.
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE
indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be mor ...
Depress the brake pedal.
Depress the clutch pedal with a Manual Transmission.
Shift into N (Neutral) with an Intelligent Variable Transmission.
Press the CANCEL button.
Decrease the vehic ...
Other information:
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type
B) (for 4 door)
If the Side marker (LED) (1) does not operate, have the vehicle checked by an
authorized Kia dealer.
The LED lamps cannot be replaced as a single component because it is part of
an integrated unit. T ...
Components and components location
Component Location
1. Front door scuff trim
2. Rear door scuff trim
Repair procedures
Replacement
Put on gloves to protect your hand ...