Kia Rio: Tailgate / Tailgate Latch

Kia Rio 2017-2023 YB Service Manual / Body (Interior and Exterior) / Tailgate / Tailgate Latch

Components and components location

Component Location

(5Door)

1. Tailgate Latch

Repair procedures

Replacement

(5Door)

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the Tailgate trim. (Refer to Tailgate - "Tailgate Trim")

2.	Disconnect the Tailgate latch connector (A).

Remove the Tailgate latch assembly (B) after loosening the mounting bolts (A).

Tightening torque :

6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

Install in the reverse order of removal.

•	Make sure the Tailgate locks/unlocks and opens/closes properly.

•	Adjust the Tailgate alignment.

•	Make sure the connectors are connected in properly.

❮Tailgate Trim

Components and components location Component Location 1. Tailgate trim Repair procedures Replacement Put on gloves to protect your hands.

Tailgate Lift❯

Repair procedures Replacement (5Door) Be careful as the tailgate may fall down on people when the lifts are removed.

Other information:

Kia Rio 2017-2023 YB Service Manual: Overhead Console Lamp

Repair procedures Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. Removal 1.

Kia Rio 2017-2023 YB Service Manual: Photo Sensor (FATC only)