| Component Location |

| 1. Sunvisor |
2. Retainer |
| Replacement |
Put on gloves to protect your hands. |
|
| 1. |
Remove the sunvisor (A) and retainer (B) after loosening the screws.
|
| 2. |
Install in the reverse order of removal.
|
Components and components location Components (1) [Normal] 1. Sunvisor assembly [LH] 2. Sunvisor assembly [RH] 3.
Components and components location Component Location 1. Assist handle Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.