Kia Rio: Trip information (Trip computer) / One time driving information mode (for type B cluster)
The vehicle will display Driving Information once per each ignition cycle.
- Fuel efficiency is calculated after the vehicle has run for more than 300 meters
(0.2 miles).
- The Driving Information will be reset 4 hours after the ignition has been turned
off. So, if the vehicle ignition is turned on within 4 hours, the information will
not be reset.
- If you press the “OK” button for more than 1 second after the Driving Information
is displayed, the information will be reset.
- If the engine is running, the information will be accumulated even when the vehicle
is not in motion.
Digital speedometer
■ Type A
■ Type B
This mode displays the current speed of the vehicle.
Accumulated driving information mode (for type B cluster)
Displays accumulated information sta ...
(1) Trip Computer mode
This mode displays driving information like the tripmeter, fuel economy, and
so on.
❈ For more details, refer to “Trip Computer” in this chapter.
(2) User Setting m ...
Other information:
1. Open the trunk lid.
2. Loosen the light assembly retaining screws with a cross-tip screwdriver.
3. Remove the rear combination lamp assembly from the body of the vehicle.
4. Disconnect the rear combination lamp connector.
5. Remove the socket from the assembly by turning the socket coun ...
Components and components location
Component Location
1. Front door trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...