The trip computer is a microcomputer- controlled driver information system that displays information related to driving.
✽ NOTICE
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Overview LCD windows show the following various information to drivers. - Trip information - LCD modes - Warning messages
- For Type A cluster To change the trip mode, press the TRIP button. - For Type B cluster To change the trip mode, scroll the MOVE scroll switch ( ) in the trip computer mode.
Repair procedures Inspection 1. Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column. 2. Check for continuity between the terminals.
Repair procedures Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torque : 2.7~3.2 N.m (0.28~0.