Specifications Specifications Transaxle model M6CF1 Engine type Gasoline 1.4 MPI Manual transalxe oil Capacity 1.
Components and components location Components Location 1. Control shaft complete Repair procedures Removal 1. Shift the gear to "neutral".
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.