| Inspection |
[Kappa 1.0 T-GDI]
Check the valve clearance.
If necessary, adjust the valve clearance by replacing the tappets.
Repair procedures Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more.
Repair procedures Inspection Vapor hose 1. Check all the clamps for tightness and the connections for leakage. 2.
Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly") 3.
Description and operation Description The photo sensor is located at the center of defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is tran