Kia Rio: Light bulbs / Light bulb position (Side)
■ Type A
■ Type B
(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type)
■ Rear combination lamp (4 Door) - Type A ■ Rear combination lamp (4 Door) - Type B ■ License plate lamp (4 Door) ■ High mounted stop lamp (4 Door) (1) Rear turn signal lamp (Bulb type) (2) Back up lamp (Bulb type) (3) Stop and tail lamp/Side marker (Bulb type) (4) Tail lamp (Bulb type) (5) Stop lamp (LED type) (6) Tail lamp (LED type) (7) Side marker (LED type) (8) License plate lamp (9) High mounted stop lamp
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Unsnap the headlamp bulb retaining wire by pressing the end and pushing it upward.
Other information:
Kia Rio 2017-2023 YB Service Manual: Front Fog Lamps
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3. Remove the front fog lamp assembly (A) after loosening the mounting screws.
Kia Rio 2017-2023 YB Service Manual: Rear Washer Switch
Repair procedures Inspection Multifunction Switch Inspection [BCM Type] 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] Switch Switch position Switch terminal
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Suspension System
- Motor Driven Power Steering
- Steering System
- New on site
- Most important about car
