Kia Rio: Warning lights / Electric Power Steering (EPS) Warning Light, Malfunction Indicator Lamp (MIL)

Kia Rio 2017-2023 YB Owner's Manual / Features of your vehicle / Warning lights / Electric Power Steering (EPS) Warning Light, Malfunction Indicator Lamp (MIL)

Electric Power Steering (EPS) Warning Light (if equipped)

This warning light illuminates:

  • Once you set the ignition switch or Engine Start/Stop Button to the ON position.
    - It remains on until the engine is started.
  • When there is a malfunction with the EPS.

In this case, have your vehicle inspected by an authorized Kia dealer.

Malfunction Indicator Lamp (MIL)

This warning light illuminates:

  • Once you set the ignition switch or Engine Start/Stop Button to the ON position.
    - It remains on until the engine is started.
  • When there is a malfunction with the emission control system. In this case, have your vehicle inspected by an authorized Kia dealer.

CAUTION

If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible, which could result in loss of engine power.

In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible.

CAUTION - Malfunction Indicator Lamp (MIL)

Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control systems, which could affect drivability and/or fuel economy.

    Anti-lock Brake System (ABS) Warning Light This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.

    This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started.

    Other information:

    Kia Rio 2017-2023 YB Service Manual: Ignition Switch

    Repair procedures Inspection 1. Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column. 2. Check for continuity between the terminals.

    Kia Rio 2017-2023 YB Service Manual: Power Mosfet (FATC)

    Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed.

    Categories

     
    Copyright © 2026 www.krioyb.com - 0.0143