| Replacement |
Put on gloves to protect your hands. |
|
| 1. |
Remove the front door trim. (Refer to Front Door - "Front Door Trim") |
| 2. |
Separate the inside handle (A) after loosening the mounting screw.
|
| 3. |
Remove the front door inside handle (B) after disconnecting the cable (A).
|
| 4. |
Install in the reverse order of removal.
|
Components and components location Component Location 1. Front door trim Repair procedures Replacement Put on gloves to protect your hands.
Components and components location Component Location 1. Front door window glass Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. 3. Disconnect the license lamp connector (A).
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. Select the control switch to raise voltage until high speed.