Components and components location Components 1. Front disc 2. Dust cover 3. Knuckle Repair procedures Removal 1.
Components and components location Components Location 1. Drive shasft (LH) 2. Drive shaft (RH) [RH] 1.
Repair procedures Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Components and components location Components Connector pin function NO. Connector A Connector B 1 Low Battery 2 Common ISG Battery 3 High Illumination (+)