Kia Rio: Cruise Control system / To resume cruising speed at more than approximately 30 km/h (20 mph)
If any method other than the CRUISE button was used to cancel cruising speed
and the system is still activated, the most recent set speed will automatically
resume when you move the lever up (to RES+).
It will not resume, however, if the vehicle speed has dropped below approximately
30 km/h (20 mph).
✽ NOTICE
Always check the road conditions before you move the lever up (to RES+) to
resume the speed.
Depress the brake pedal.
Depress the clutch pedal with a Manual Transmission.
Shift into N (Neutral) with an Intelligent Variable Transmission.
Press the CANCEL button.
Decrease the vehic ...
Press the CRUISE button (the CRUISE indicator light in the instrument cluster
will go off).
Turn the ignition off.
Both of these actions cancel cruise control operation. If you want to re ...
Other information:
Specifications
Specification
ETC Module
Throttle Position Sensor (TPS) [integrated into ETC Module]
▷ Type: Hall IC Non-contact sensor type
▷ Specification
Throttle angle(°)
Output Voltage (V) [Vref=5V]
TPS1
TPS2
...
Repair procedures
Inspection
Manual Transaxle Oil
Level Check
1.
Stop the engine and then raise the vehicle using the lift.
2.
Remove the oil filler plug (A).
3.
Check the condition of the oil and make sure t ...