| Replacement |
| 1. |
Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") |
| 2. |
Remove the sunroof sunshade. (Refer to Sunroof - "Sunroof Sunshade") |
| 3. |
Push down the slide and remove the drip link assembly (A).
|
| 4. |
Separate the drip link (B) and guide (A).
|
| 5. |
Remove the shoe (A).
|
| 6. |
Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow.
|
| 7. |
Install in the reverse order of removal.
|
Repair procedures Replacement 1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.
Components and components location Component Location 1. Quarter fixed glass Repair procedures Replacement 1.
Repair procedures Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to componen
Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.