Kia Rio: Sunroof / Sunroof Sunshade
Repair procedures
| Replacement |
| 1. |
Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") |
| 2. |
Remove the drip rail assembly (A) after loosening the mounting screws.
|
| 3. |
Separate the rear drip (A) after loosening the mounting screws.
|
| 4. |
Remove the stopper (A) by pushing it in the direction of the arrow.
|
| 5. |
Remove the sunroof sunshade (A) by pushing it backward.
|
| 6. |
Install in the reverse order of removal.
|
Components and components location Components 1. Sunroof assembly Repair procedures Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Repair procedures Replacement 1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.
Other information:
Kia Rio 2017-2023 YB Service Manual: Windshield Wiper/Washer
Components and components location Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose & nozzle 4. Wiper motor & linkage assembly 5. Washer motor 6.
Kia Rio 2017-2023 YB Service Manual: Mode Control Actuator
Description and operation Description The mode control actuator is located at the heater unit. It adjusts position of mode door by operating mode control actuator based on signal of A/C control unit. Pressing mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Normal Condition
- Maintenance
- Steering System
- New on site
- Most important about car
