Kia Rio: Front Bumper / Radiator Grill

Kia Rio 2017-2021 YB Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill

Components and components location
Component Location

1. Radiator grill


Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the front bumper cover.

(Refer to Front Bumper - "Front Bumper Assembly")

2.

Remove the front bumper energy absorber (A).

3.

Remove the front bumper grill (A).

4.

Remove the front bumper radiator grill (A).

5.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Front Bumper Assembly
Components and components location Component Location 1. Front bumper cover Repair procedures Replacement &nb ...

Front Door
Components and components location Components 1. Front door trim 2. Front door panel 3. Front door rear channel & run 4. Front door belt inside weatherstrip ...

Other information:

Kia Rio 2017-2021 YB Service Manual: Height Adjust


Components and components location Component Location 1. Height adjust Repair procedures Replacement 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Retractor") ...

Kia Rio 2017-2021 YB Service Manual: Oil Pressure Switch


Repair procedures Removal and Installation 1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft) ...

Copyright © www.krioyb.com 2017-2021