Kia Rio: Light bulbs / Light bulb position (Side)
■ Type A
■ Type B
(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type)
■ Rear combination lamp (4 Door) - Type A ■ Rear combination lamp (4 Door) - Type B ■ License plate lamp (4 Door) ■ High mounted stop lamp (4 Door) (1) Rear turn signal lamp (Bulb type) (2) Back up lamp (Bulb type) (3) Stop and tail lamp/Side marker (Bulb type) (4) Tail lamp (Bulb type) (5) Stop lamp (LED type) (6) Tail lamp (LED type) (7) Side marker (LED type) (8) License plate lamp (9) High mounted stop lamp
1. Open the hood. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Unsnap the headlamp bulb retaining wire by pressing the end and pushing it upward.
Other information:
Kia Rio 2017-2023 YB Service Manual: License Lamps
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after pressing the locking pin. 3. Disconnect the license lamp connector (A).
Kia Rio 2017-2023 YB Service Manual: Compressor Oil
Repair procedures Oil Specification 1. The HFC-134a system requires synthetic compressor oil (PAG) whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor oil (PAG) varies according to compressor model.
Categories
- Manuals Home
- Kia Rio Owners Manual
- Kia Rio Service Manual
- Suspension System
- Engine Oil and Filter
- Brake System
- New on site
- Most important about car
