Kia Rio: Light bulbs / Light bulb position (Rear) (4 Door)

■ Rear combination lamp (4 Door) - Type A

■ Rear combination lamp (4 Door) - Type B

■ License plate lamp (4 Door)

■ High mounted stop lamp (4 Door)
(1) Rear turn signal lamp (Bulb type)
(2) Back up lamp (Bulb type)
(3) Stop and tail lamp/Side marker (Bulb type)
(4) Tail lamp (Bulb type)
(5) Stop lamp (LED type)
(6) Tail lamp (LED type)
(7) Side marker (LED type)
(8) License plate lamp
(9) High mounted stop lamp
■ Rear combination lamp (5 Door) - Type A
■ Rear combination lamp (5 Door) - Type B
■ License plate lamp (5 Door)
■ High mounted stop lamp (5 Door)
(1) Rear turn signal lamp (Bulb ...
■ Type A
■ Type B
(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type) ...
Other information:
Components and components location
Component
Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
...
Carefully follow below steps.
1. Shake the sealant case.
2. Connect the filling hose (3) onto the connector of the sealant bottle (A).
3. Insert the sealant bottle into the housing of the compressor(B) so that the
bottle is upright.
4. Ensure that button (9) on the compressor is not presse ...