Kia Rio: Light bulbs / Headlamp (Low/High beam) (Bulb type) bulb replacement (Headlamp Type A)

1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Unsnap the headlamp bulb retaining wire by pressing the end and pushing it
upward.
5. Remove the bulb from the head lamp assembly.
6. Install a new headlamp bulb and snap the headlamp bulb retaining wire into
position by aligning the wire with the groove on the bulb.
7. Connect the headlamp bulb socket- connector.
8. Install the headlamp bulb cover by turning it clockwise.
Headlamp bulb Side marker (front) (Bulb type)

WARNING - Halogen bulbs
Handle halogen bulbs with care.
- Halogen bulbs contain pressurized gas that will produce flying pieces
of glass if broken.
- Always handle them carefully, and avoid scratches and abrasions. If the
bulbs are lit, avoid contact with liquids. Never touch the glass with bare hands.
Residual oil may cause the bulb to overheat and burst when lit. A bulb should
be operated only when installed in a headlamp.
- If a bulb becomes damaged or cracked, replace it immediately and carefully
dispose of it.
- Wear eye protection when changing a bulb. Allow the bulb to cool down
before handling it.
■ Type A
■ Type B
(1) Side repeater lamp (LED type)
(2) Side repeater lamp (bulb type) ...
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembl ...
Other information:
General information
Warning And Caution Labels
1. Fan caution
2. Radiator cap caution
3. Battery caution
Battery Caution Label
Warning / Caution Label
(Cont'd)
A.
Keep lighted cigarettes and all other flames or sparks a ...
Specifications
Specification
Engine Coolant Temperature
Sensor (ECTS)
▷ Type: Thermistor type
Temperature
Resistance (kΩ)
°C
°F
-40
-40
48.14
-20
-4 ...