Kia Rio: Light bulbs / Side marker (front) (Bulb type) bulb replacement (Headlamp Type A)

1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembly.
3. Remove the bulb from the bulbsocket by pulling it out.
4. Insert a new bulb by inserting it into the bulb-socket.
5. Install the socket in the headlamp assembly by aligning the tabs on the bulb-socket
with the slots in the assembly. Push the bulb-socket into the headlamp assembly
and turn the socket clockwise.
1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Unsnap the headlamp bulb retaining wire by pressing the en ...
1. Open the hood.
2. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp
assembl ...
Other information:
The vehicle will display Driving Information once per each ignition cycle.
- Fuel efficiency is calculated after the vehicle has run for more than 300 meters
(0.2 miles).
- The Driving Information will be reset 4 hours after the ignition has been turned
off. So, if the vehicle ignition is tu ...
For your safety, the Intelligent Variable Transmission (IVT) has a shift lock
system which prevents shifting the transmission from P (Park) into R (Reverse) unless
the brake pedal is depressed.
To shift the transmission from P (Park) into R (Reverse):
1. Depress and hold the brake pedal.
2. S ...