
■ Rear combination lamp (5 Door) - Type A

■ Rear combination lamp (5 Door) - Type B

■ License plate lamp (5 Door)

■ High mounted stop lamp (5 Door)
(1) Rear turn signal lamp (Bulb type)
(2) Back up lamp (Bulb type)
(3) Stop and tail lamp (Bulb type)
(4) Tail lamp (Bulb type)
(5) Side marker (Bulb type)
(6) Stop and tail lamp (LED type)
(7) Side marker (LED type)
(8) License plate lamp
(9) High mounted stop lamp
■ Head lamp - Type A ■ Head lamp - Type B ■ Fog lamp - Type A ■ D.R.L. Lamp - Type A ■ D.R.L. Lamp - Type B (1) Headlamp (Low/High) (Bulb type) (2) Side marker (Bulb type) (3) Front turn signal lamp/ Position lamp (4) Front turn signal lamp (Bulb type) (5) Headlamp (Low/High) (Bulb/LED type) (6) Side marker (LED type) (7) Position lamp (LED type) or Position lamp/Day time running lamp (LED type) (8) Fog lamp (Bulb type) (9) Day time running lamp (Bulb type)
■ Rear combination lamp (4 Door) - Type A ■ Rear combination lamp (4 Door) - Type B ■ License plate lamp (4 Door) ■ High mounted stop lamp (4 Door) (1) Rear turn signal lamp (Bulb type) (2) Back up lamp (Bulb type) (3) Stop and tail lamp/Side marker (Bulb type) (4) Tail lamp (Bulb type) (5) Stop lamp (LED type) (6) Tail lamp (LED type) (7) Side marker (LED type) (8) License plate lamp (9) High mounted stop lamp
Repair procedures Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torque : 2.7~3.2 N.m (0.28~0.
Components and components location Component Location Components 1. Intake actuator 2. Air filter 3. Air filter cover 4. Resistor 5. Mosfet 6. Intake seal 7. Intake upper cover 8.